Dräger HPS® 7000 Helmets

Dräger HPS® 7000

Contact us

Dräger HPS® 7000

The multipurpose Dräger HPS® 7000 firefighter’s helmet is in a class of its own, thanks to its innovative, sporty and dynamic design, ergonomic fit and components which make it a multifunctional system solution. It provides optimum protection during every operation.

SAFETY+

Design at its strongest
Despite its low weight, our multipurpose firefighting helmet Dräger HPS 7000 is one of the safest full-shell helmets in its class. Its outer shell of composite material in combination with the PUR inner shell provides reliable protection against thermal and mechanical influences. The plastic reinforced with fibreglass and aramid webbing resists extreme temperatures. It is even able to withstand the enormous radiation caused by the heat and flame engulfment of a flash over.

The visors, made of high-temperature-resistant material, reliably protect your eyes and face against high heat, particles and liquid chemicals. The large and modern facial protection visor offers unrestricted protection with best visibility. For operations under chemical protective suits, the visor can be fixed permanently. A safe alternative is provided by the integrated and individually adjustable eye protection visor with an integrated soft-pad edge protection. Both visors leave enough space for the simultaneous use of corrective glasses or respiratory masks.

Innovative mask-helmet adaption system
As a provider of integrated system solutions, Dräger sets new standards for the interaction of its products. The universally and individually adjustable mask connection system of the Dräger HPS 7000 creates a strong and safe helmet-mask combination. The full-face mask Dräger FPS® 7000 especially as mask-helmet-combination, the Dräger mask communication system Dräger FPS®-COM 5000 / FPS®-COM 7000 and the SCBA of the PSS series allow you to optimally configure the overall system.

For better visibility
The helmet is available in a wide range of colours. For the best possible protection in conditions of poor visibility, you can also fix reflective strips in different designs all around the helmet, making it easily identifiable day or night.

With the individual lighting solutions, your immediate work area can be illuminated as needed: our integrated, explosion-proof helmet lamps can be fitted at the front or side and can be handled hands-free. The lightweight LED helmet lamp Dräger HPS® FlashLight is integrated into the helmet shell and illuminates the whole working area. It is located in the centre of the front plate and has an effective glare shield as well as an intelligent battery management system. For additional safety, the Dräger HPS® BuddyLight on the back of the helmet makes you instantly recognisable from behind, even in conditions of poor visibility.

USABILITY

Firefighting helmet with tailor-made fit for every head
To meet this requirement, Dräger developed the HPS 7000 firefighting helmet in close cooperation with customers worldwide. Two helmet shells for head sizes from 50 to 66 cm cover a wide range of individual head and face shapes. With a weight of approx. 1,360 g in the basic version, it is one of the lightest helmets in its class. The ergonomic design of the firefighter helmet distributes the weight evenly on the head and thus relieves your neck muscles.

Comfort is a matter of position
In addition to its comfortable interior fitting made of skin-friendly, anti-allergic and flexible materials, the Dräger HPS 7000 stands out with its high level of operating and wearing comfort. The padded 4-point harness allows for safe and easy adjustment to any head shape. The optimum balance of the firefighting helmet can be adjusted individually in the neck and chin area. The padding made of Nomex® also ensures a comfortable fit. The integrated comfort hairnet or alternatively the comfort pad enables the height to be adjusted and assures a good climate inside the helmet. During operation, the head size can be adjusted quickly via an easy-to-operate size adjustment wheel with a safety mechanism on the outer shell, even with wet and stiff gloves.

Nothing left to be desired
A firefighter’s helmet is more than a mere piece of equipment – it serves as a personal distinguishing feature. That's why you can also assemble the helmet according to your wishes: from a variety of colour options to the attachment of reflective stripes for individual marking to an individual emblem for your front plate. A comprehensive accessory programme completes the Dräger package. Matched to your clothing, the various neck-protector versions reliably keep your back free. With the innovative PARASNAP adapter solution, a wide variety of helmet lamps as well as action cams can be used together with the helmet. A Nomex® fabric protects your firefighting helmet in any training situation and extends its service life. Helmet bags and cases provide safe storage and transport.

Nomex® is a registered trademark of the company DuPont.
PARASNAP® is a registered trademark of the company PARAT GmbH + Co. KG.

Connectivity

Optional integrated communication system
The integrated Dräger HP®S-COM helmet communication unit provides reliable support for radio communication. Alongside its excellent voice quality, its stand-out features include a robust, compact design, easy and safe installation. The new dual-mic technology is ideally suited to all operations, with or without breathing protection.

Serviceability

Ready again in no time at all
The Dräger HPS 7000 firefighting helmet is easy and efficient to service, thanks to the minimum number of components. The entire interior fitting can be removed and reinstalled in just a few steps. You can replace individual components easily and quickly using standard tools. Whether manually or mechanically - you can use any common cleaning process on this protective helmet without any problems. All electronic accessory components can be powered using standard commercial batteries. In addition, RFID transponders and barcode technology also support your logistics processes.

Downloads

HPS 7000 Product information, en-gb
HPS 7000 Product information, en-gb

The multipurpose Dräger HPS® 7000 firefighter’s helmet is in a class of its own, thanks to its innovative, sporty and dynamic design, ergonomic fit and components which make it a multifunctional system solution. It provides optimum protection during every operation.

Download

HPS BuddyLight: Technical Data Sheet, en
HPS BuddyLight: Technical Data Sheet, en

Download

HPS 7000 Customised labelling Poster, en-gb
HPS 7000 Customised labelling Poster, en-gb

The Dräger HPS® 7000 series also offers a comprehensive range of customised labelling. Whether reflective stripes, individual lettering or stickers on the front plate - you can customise your HPS 7000 according to your needs.

Download

Damage assessment and recommended actions: Dräger HPS 7000 (PDF)
HPS 7000 H1 Fire helmet: Technical Data Sheet, en
IFU HPS 7000 9021991 ME
IFU HPS 7000 9300041 ME
IFU SP HPS 7000 Cushioning System 9300209 de, en me
IFU SP HPS 7000 visor markings 9300131 bg, cs me
IFU SP Manual cleaning and disinfecting procedures - 9100081 de, en me

Technical Data

Key Facts

Application and helmet usage
Multi-purpose fire & rescue applications
Helmet type
Full shell helmet (Type B3b)
Helmet shell size concept and head size range
Two sizes: 50-62 or 56-66 cm
Weight
3,09 lb
Helmet shell colours
12 colours

Interior design & harness

Continuous head size adjustment
via wheel on the helmet outside
Retention system/harness
4-point harness with adjustable chin and neck straps
Suspension system
Comfort net, comfort pad
Height adjustment

Face and eye protection

Face guard
PC, available in different versions with AS/AF coating
Eye guard (optional)
clear and tinted version with different coatings
Special application visors (optional)
Google (optional)

Helmet accessories

Neck protectors (optional)
5 different versions
Helmet lamps (optional)
integrated front lamp, attached side and rear lamps
Helmet communication (optional)
integrated Dräger solution and option to attach other communication systems

Customized marking & labelling (optional)

Reflective stripes
front, back in different colours and designs
Customer logo on front
Customised writing at the back

Helmet & breathing protection

Compatible with masks
Mask-Helmet-Combination

Cleaning

Manual cleaning
Machine cleaning, tumble process
Machine cleaning, spray-nozzle process

Approvals

EN 443:2008
DIN 58610:2014
EN 16471:2014
EN 16473:2014
SOLAS and MED
EN 12492:2012
EN 1385:2012
ISO 11999-5:2015
ISO 16073-5:2019
ISO 18639-5:2018
NFPA 1971: 2018
NFPA 1951: 2020
AS/NZS 4067: 2012
CA Brazil
EAC

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Products

Dräger South Africa (Pty) Ltd.

​Johannesburg: 2 Ruacana Street, Waterfall Commercial District, (cnr Beatty Street), Buccleuch, 2090

+27(0)11 059 4200

​Postal Address: P.O. Box 4676 Rivonia, 2128 Republic of South Africa

Dräger South Africa (Pty) Ltd.

​Cape Town:  Unit 7 on London, 7 London Circle Brackengate Business Park Brackenfall, 7561

+27(0)21 552 6713

​Postal Address: P.O. Box 3677 Tygervalley 7536

Dräger South Africa (Pty) Ltd.

​Durban: 17 Thynk Industrial Park Cnr Brickworks and Queen Nandi Drive, Briardene, Durban North, 7561

+27(0)31 812 7900

​Postal Address: P.O. Box 40554 Redhill 4071