Dräger PARAT® 5500
Contact usDräger PARAT® 5500
Ready for escape in only 3 steps
Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is: open the packaging, remove the and don hood – and leave the danger zone.
Reliable protection
The high-performance combination filter reliably protects against a wide range of toxic fire-related gases, vapours and particles. The CO P2 filter is approved according to the EN standard 403:2004. In addition, the filter is tested for use against H2S (at 2500 ppm) in accordance with DIN 58647-7. The filter is securely sealed with two filter plugs keeping it safe over its long lifetime.
16 years of service life
Replacing the filter after 8 years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees. With the exception of the PARAT 5550 which requires that the complete refill kit be exchanged after 8 years.
Robust and ergonomic
Both ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.
Different packaging types
You can select between four different packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5). The fire pouch,
PARAT 5550, is packed in a flame retardant holster – or select the Single Pack with the standard filter plug system. Both, the Hard Case and the Soft Pack have viewing windows to check the filter expiration date and the condition of the device. Parcticularly convenient: The security seal on the packaging shows if the unit has been opened.
How-to-use PARAT Escape Hoods – watch our Videos
Get a quick overview about the donning of our PARAT Hoods und how to replace filters.
· How-to-use Video PARAT - Soft Pack
· How-to-use Video PARAT - Hard Case
· How-to-use Video PARAT - Single Case
Images and Videos
Downloads
Product informationen: Dräger PARAT® 5500 (PDF)
The Dräger PARAT® 5500 fire escape hood was developed in cooperation with users – always with the focus on offering the fastest possible escape.
Third-party rescue using the PARAT® 4700 Poster, en
Technical Data
Key Facts
- Product type
- Fire escape hood
- Protection against
- Fire gases, vapours and particles
- Filter type
- CO P2
- Escape time
- min. 15 minutes
- Lifetime
- 16 years (filter exchange required after 8 years)
- Packaging options
- Soft Pack (dust protection IP5); Hard Case (splash water protection IP54); Single Pack (carton box)
- Weight
- 1,59 lb
Features
- Eye protection
- ✓
- Filter expiry date
- ✓
- Training unit
- ✓
Carrying options
- Wall mounting
- ✓ (Hard Case only)
- Hip strap
- ✓ (not for Single Pack)
- Shoulder strap
- ✓ (not for Single Pack)
- Belt clip
- ✓ (not for Single Pack)
- Grip clip
- ✓ (not for Single Pack)
- D-Ring
- ✓
- Carrying case
- ✓ (Single Pack only)
- Slip guard carabiner
- ✗
- Hand strap
- ✗
Approvals
- EN 403:2004
- ✓
- DIN 58647-7
- ✓ tested for use against H2S (at 2.500 ppm)
- EN 14387:2004 (only filter)
- ✗
- EN 137:2006 Typ 2
- ✗
- NIOSH 42 CFR Part 84
- ✗
Related Products and Associated Offerings
Dräger PARAT® 4700
The Dräger PARAT® 4700 industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK P3 filter ensure ...
Dräger PARAT® 5550
The Dräger PARAT® 5550 is a fire escape hood packaged in a flame-retardant holster. It was specifically developed for fire rescue teams for use in victim rescue. The main advantage: The PARAT® 5550 is system ...
Dräger PARAT® 7500
The combined fire and industrial escape hood Dräger PARAT® 7500 was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK CO ...
Wallholder PIN for PARAT® Hard Case
Ideal for placing stationary units in a central location. For example in public buildings, where they may be needed in an emergency situation. Or optionally placed in specific locations where they may be required as a ...
Waist Belt, textile
Ideal for carrying the unit safely secured to the wearer on a daily basis. The textile waist belt is robust and comfortable to wear. The waist belt can be used with both Soft Pack and Hard Case versions.
(Order ...
Shoulder Strap
The shoulder strap is perfect for short-term and recurring operations, where the device must be quickly taken with the user. The strap can be mounted to accessory attachment points on the Hard Case or the attached loops ...
Grip Clip
The grip clip is a good carrying solution for short term applications when a securely fastened clip is needed. It is ideal to fasten on work clothes or pockets. It can be mounted on the Hard Case using the accessory ...
Adapter Plate for PARAT® Soft Pack
The adapter plate is needed to attach the belt or grip clip for use with the Soft Pack.
(Order number: R 58 742)
Wallholder HOOK for PARAT® Hard Case
Ideal for placing stationary units in a central location. For example in public buildings, where they may be needed in an emergency situation. Or optionally placed in specific locations where they may be required as a ...
Waist Belt, plastic
Ideal for carrying the unit safely secured to the wearer on a daily basis. The flexible plastic-coated waist belt is easy to clean, especially after work in rough environments. The waist belt can be used with both Soft ...
Belt Clip
The belt clip can be used with any standard belt. Ideal for short term applications like inspection or maintenance where the unit is often attached to and removed from the belt. Can be mounted on the Hard Case using the ...
D-Ring for PARAT® Hard Case
The d-ring is ideal for carrying the unit in combination with a carabiner hook. A d-ring is already a standard part of the Soft Pack. This is an optional accessory for the Hard Case and can be mounted using the ...
Dräger PARAT® Training Hood
The Dräger PARAT® Training Hood is an ideal way to train employees on the donning and use of escape hoods. Training versions come standard with a filter dummy for hygenic use. They are available in ...
