Compare

Dräger PIR 7000

Flammable Gas Detectors
  • Explosion proof point infrared gas detector
  • Continuous monitoring of flammable gases and vapours
  • Drift-free optics and robust product design
Dräger PIR 7000 Flammable Gas Detectors
Dräger PIR 7000 Flammable Gas Detectors
Dräger PIR 7000 Flammable Gas Detectors
Dräger PIR 7000 Flammable Gas Detectors
Compare

Stay safe: Measure flammable gases with Dräger's expertise

Quick Links
Specifications
Accessories
Downloads
Explore all substances
Infrared
Measuring Principle
< 1 second (fast response)
Response time
IP66/67
Degree of protection (IP class)
C4H8, C4H10O2, C2H4Cl2, C3H6Cl2, C8H10, C3H4Cl2, C4H8O, C4H10 and more
Substances
See all relevant substances
Open full specifications

Highlights

The Dräger PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours. With its stainless steel SS 316L enclosure and drift-free optics this detector is built for the harshest industrial environments, e.g. offshore installations.

Dräger PIR 7000

Two models of the Dräger PIR 7000 are available – type 334 and type 340. Each model works with a different measuring wavelength, thus giving the broadest possible range of detectable substances with superior accuracy.

Advanced signal stability

Following the success of the most stable point infrared gas detector worldwide – the Dräger Polytron IR – Dräger now introduce the Dräger PIR 7000 which encompasses the latest in revolutionary technology.
Based on patented innovations, the Dräger PI More information

Fast response

Equally important is being informed about a potential hazard as early as possible. An early and reliable gas alarm allows for safety measures to be initiated on site.
To support this, the Dräger PIR 7000 offers a configurable response mode which al More information

Multiple configuration capabilities

The Dräger PIR 7000 is delivered with the optimum default settings, but remains fully flexible to meet with the customers demands on an application-by-application basis. Whether it be reduced measuring ranges, configurable special signals (fault, bea More information

Maximum reliability – SIL 2 certified

After almost two decades of experience with infrared technology, leading to a continuously enhanced product quality, the Dräger PIR 7000 is further advanced as the total product has been developed in line with the Functional Safety standard EN 61508. More information

Dräger PIR 7000 offers

  • Configurable gas library – methane, propane and ethylene fixed, up to 10 additional substances can be uploaded
  • Multiple mounting and configuration capabilities (signals acc. to NAMUR NE 43)
  • Precise and stable measurement
  • Fastest response of less than More information

360° Product View

Draeger PIR 7000 360

Specifications

Infrared
Measuring Principle
< 1 second (fast response)
Response time
IP66/67
Degree of protection (IP class)
C4H8, C4H10O2, C2H4Cl2, C3H6Cl2, C8H10, C3H4Cl2, C4H8O, C4H10 and more
Substances
See all relevant substances

Key Facts

Type
Transmitter
Measuring Principle
Infrared
Response time
< 1 second (fast response)
Cable entry
M25 or 3/4" NPT
Display
Intrinsic Safety
Flameproof
Increased Safety
SIL
SIL 2 (IEC 61508-1-3)
4-20 mA
Bus
HART®
Wireless

Technical Data

Power Supply
13 to 30 VDC
Temperature (operation)
-40°C - 77°C
Humidity
0 to 100% r.h.
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
16x8.9x8.9 cm
Weight
4.85 lb
Housing Material
Stainless steel SS 316L
Degree of protection (IP class)
IP66/67

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval
FM

Dräger VOICE
Your hazmat-based safety product finder

Relevant information and specific recommendations of safety equipment for more than 1,500 hazardous substances.

See the whole Product System.

This product is part of a Dräger system solution. Combine it with the following system components.

Connective Products

Controller -    Dräger REGARD 1000
Dräger REGARD 1000
  • Flexible evaluation system for up to four transmitters
  • Equipped with three freely configurable alarm relays and one fault relay
  • Data logging for efficient recording and analysis of the gas detection system
  • Can be mounted in a control cabinet or on the wall
More Information
Controller - Dräger REGARD® 3000
Dräger REGARD® 3000
  • Modular control system for various gas and vapour monitoring
  • Multi-coloured status light signals system status
  • Allows combination of Input, Relay, and Gateway modules
More Information
Controller - Dräger REGARD® 3900 Series
Dräger REGARD® 3900 Series
  • Standalone control system with up to 16 configurable measuring channels
  • Modular setup for plant-specific customization
More Information
Controller - Dräger REGARD® 7000
Dräger REGARD® 7000
  • Highly expandable control and analysis system
  • Monitors various gases and vapours
  • Suitable for complex gas warning systems
More Information

Accessories

Calibration adapter
Calibration adapter
Calibrating a transmitter (with mounted splash guard), up to wind force 10 Bft, mountable with one hand.

Order No.: 68 11 610
Dräger CC-Vision GDS
Dräger CC-Vision GDS
Configuration and calibration software for the following stationary gas detection systems: Dräger PIR 7000, Dräger PIR 7200, Dräger Polytron 7000, including status and diagnosis functions.

Order No.: 68 11 989
Duct mount kit
Duct mount kit
Mounting the transmitter directly in pipes or ducts, air-tight even under positive pressure, optional accessory parts for functional checks and remote calibration available.

Order No.: 68 11 850
Flow cell
Flow cell
Function test/calibration of the transmitter in high wind forces and/or high test gas concentration, including status display, suitable for process applications.

Order No.: 68 11 490
Hydrophobic filter
Hydrophobic filter
Guards the measuring cuvette against dirt and dust, can be combined with other accessory parts.

Order No.: 68 11 890
Insect guard
Insect guard
Guards against insects or spiders that might block the gas inlet or outlet apertures of the splash guard, UV resistant.

Order No.: 68 11 609
Magnetic wand
Magnetic wand
Simple and fast calibration (zero-point and sensitivity) of the transmitter, feedback through status lights.

Order No.: 45 43 428
Mounting set
Mounting set
Mounting the transmitter on flat or curved surfaces, vibration-resistant up to 4 G, flexibly mountable in any 90° direction.

Order No.: 68 11 648
Process adapter
Process adapter
Sampling or process applications, fast response behavior through minimum inner volume, material: POM (conductible).

Order No.: 68 11 915
Process cuvette
Process cuvette
Sampling or process applications, fast response behavior through minimum inner volume, material: Stainless steel.

Order No.: 68 11 415
Remote test adapter
Remote test adapter
Function test/calibration of the transmitter with the usual test gas concentrations, including status display.

Order No.: 68 11 630
Splash guard
Splash guard
Guards the measuring cuvette against dirt and dust, quick gas exchange through "chimney effect", reflecting fluorescent strips.

Order No.: 68 11 911
Status display
Status display
The permanent display of the measuring mode or disruption with a green or yellow light signal, can be combined with other accessory parts.

Order No.: 68 11 625
Next Steps

Get in touch with Dräger

woman black hair
Dräger South Africa (Pty) Ltd.
​Postal Address: P.O. Box 4676 Rivonia, 2128 Republic of South Africa
​Johannesburg: 2 Ruacana Street, Waterfall Commercial District, (cnr Beatty Street), Buccleuch, 2090
Dräger South Africa (Pty) Ltd.
​Postal Address: P.O. Box 3677 Tygervalley 7536
​Cape Town: Unit 2, 7 on London, 7 London Circle, Brackengate Business Park Brackenfell, 7561
Dräger South Africa (Pty) Ltd.
​Postal Address: P.O. Box 40554 Redhill 4071
​Durban: 17 Thynk Industrial Park Cnr Brickworks and Queen Nandi Drive, Briardene, Durban North, 7561
Dräger Kenya Ltd
Postal​ ​Address:​ ​PO​ ​Box​ ​2380​ ​–​ ​00606,​ ​Nairobi,​ ​Kenya.
Nairobi:​ ​8th​ ​Floor​ ​Office​ ​2,​ ​Sanlam​ ​Tower,​ ​Westlands