This website uses cookies. By using the website you agree to our cookie policy. You can change your cookie settings in your browser.Find out more

Dräger X-act® 7000

​The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes, start measuring, then read out the test result. 

Multi-Gas Detector

  • ​Opto-electronic analysis system for selective detection of carcinogenic and toxic substances
  • Lab quality measurement in ppb range
  • To be used with Dräger MicroTubes
  • With coupler and X-am pump suitable for CSE

Measures the lowest-quantity concentrations with lab-quality analysis

​Concentrations of hazardous substances in ambient workplace air must never exceed the defined limits. Monitoring these sometimes very low concentration levels is a responsible task. The Dräger X-act 7000 in combination with Dräger MicroTubes is focussed on measuring carcinogenic and toxic substances in the low ppb range. This sensitive testing system is based on colorimetric chemical sensors. These are capable of replacing conventional laboratory analysis and providing precise results right on site. This saves time and money.

More safety thanks to high selectivity

​The substance-specific reactive layers and multiple pre-layers in the Dräger MicroTubes allow for selective gas testing. The various layers serve as a filter, for example. During testing, they filter out other substances that occur in the workplace so that only the target substance is reflected in the test result. This greatly eliminates cross-sensitivities and reduces the number of false-positive test results and false alarms.

Explosion-proof and ready to use

​The RFID tags applied to the Dräger MicroTubes contain all the calibration data that apply throughout their normal lifespan of one year. This eliminates the need for lengthy function tests and manual calibration. Because it works on the basis of mass-flow measurement, air pressure fluctuations have no influence on the device. Any possible temperature or humidity influences are already accounted for during the factory calibration. The analyser is explosion-proof and certified under ATEX/IECEx for Zone 0. The system is also dust- and splash-resistant in accordance with IP54. It also meets the requirements for electromagnetic compatibility under EN 61326-1.

Easy to use

After an automatic self-test, the X-act 7000 analysis system is immediately ready for use. It is suitable for testing with all available Dräger MicroTubes. Simply insert the right Dräger MicroTube for your testing needs. The automatic drive carefully draws the MicroTube in and positions it. Control your test using the 3-button control and 2.4 inch colour display. When the test is complete, the green LED will glow and a message is displayed on the screen. You can store the test result, location and time in the internal data logger and read it later using the Dräger CC Vision software. The device is powered by five easily replaceable standard batteries. The life time of the recommended batteries lasts for more than ten hours of testing and can be read on the display.

Also suitable for pump-assisted testing

​Using the coupler (connector piece), the Dräger X-am® Pump can be adapted to the X-act 7000. This allows you to test for carcinogenic and toxic substances in the ppb range, even in hard-to-reach places like ducts, pipelines or tanks up to a distance of 45 metres (147.6 feet). Because the X-am Pump is also certified explosion-proof for Zone 0, it is perfectly suited for these tasks.


Handbook for Dräger-Tubes® and MicroTubes
Handbook for Dräger-Tubes® and MicroTubes

General information regarding gas measurement, information about our Dräger-Tubes and their applications as well as about our analysis system X-act 7000 with MicroTubes, and CMS.


Portable Gas Detection - Family Brochure, en
Portable Gas Detection - Family Brochure, en


IFU Dräger MicroTubes Mercaptan 50 - 6000 ppb (8610360) - 9300156 de-me
IFU Dräger MicroTubes Mercaptan 50 - 6000 ppb (8610360) - 9300156 de-me

These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.


IFU Dräger MicroTubes Nitrous fumes 0.25 - 50 ppm (8610060) - 9300143 de-me
IFU Dräger MicroTubes Phosgene 10 - 1000 ppb (8610340) - 9300141 de-me
IFU Dräger MicroTubes Sulfur dioxide 0.05 - 5 ppm (8610110) - 9300142 de-me

Pumps, Tubes and substances

Dräger-Tubes can be used to measure a large number of different substances. Check the different tubes and measuring ranges which can be used with this pump by searching for a substance.

Search for substance

Please enter a substance

Product configurations

for the pump Dräger X-act® 7000

Utilise for 23 Substances

27 matching Tube(s)