tert-ButylbenzeneC10H14
CAS-No.: | 98-06-6 |
|---|---|
UN-No.: | 2709 |
EC-No.: | 202-632-4 |
Hazard identification number: | 30 |
Warning sign: |
|
Hazard signs
- H: 226
Flammable liquid and vapour
- H: 304
May be fatal if swallowed and enters airways
- H: 315
Causes skin irritation
- H: 332
Harmful if inhaled
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking.
- P: 301 + 310
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 331
Do NOT induce vomiting
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-58 °C Boiling Point:
169 °C Density (at 20 °C, if not notified otherwise):
0,87 g/cm3Ionization:
8.68 ± 0.03 eVFlash Point:
44 °C Ignition Temperature:
445 °C Vapour Pressure (at 20 °C, if not notified otherwise):
2,2 hPaLower Explosive Limit:
0,8 Vol.-%Upper Explosive Limit:
5,6 Vol.-%
Details
| 3 | Flammability: Flammable with normal temperature | |
| 0 | Instability: No danger for normal conditions | |
| 1 | Health: Low risk. Filter recommended | |
| DG-EA: | 3Y | |
Also known as:
- tert-butylbenzene
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for tert-Butylbenzene C10H14
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
- Powered-Air Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Protective Suits
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Dräger SPC 4400 / SPC 4800 / SPC 4900
- Splash Suit
- Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
- CPM (single use) or CLF (limited use)
- Antistatic version ...
SPC 4700 with CVA 0700
- Splash Suit
- Ventilated splash-protective suits
- Continuous supply of breathing air and cooling airflow (type 3 suit)
- Coated barrier protection material CPM or carrier fleece material CLF
- Limited ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
