Toluene 2,4-diisocyanateC9H6N2O2
CAS-No.: | 584-84-9 |
|---|---|
UN-No.: | 2078 |
EC-No.: | 209-544-5 |
Hazard identification number: | 60 |
Warning sign: |
|
Hazard signs
- H: 315
Causes skin irritation
- H: 317
May cause an allergic skin reaction
- H: 319
Causes serious eye irritation
- H: 330
Fatal if inhaled.
- H: 334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H: 335
May cause respiratory irritation
- H: 351
Suspected of causing cancer.
- H: 412
Harmful to aquatic life with long lasting effects
- P: 201
Obtain special instructions before use
- P: 273
Avoid release to the environment
- P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection.
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 304 + 340 + 310
IF INHALED:
Remove victim to fresh air
and keep at rest in a position
comfortable for breathing.
Immediately call a POISON
CENTER or doctor/physician.
- P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
21 °C Boiling Point:
251 °C Density (at 20 °C, if not notified otherwise):
1,22 g/cm3Flash Point:
127 °C Ignition Temperature:
620 °C Vapour Pressure (at 20 °C, if not notified otherwise):
0,03 (30°C) hPaLower Explosive Limit:
0,9 Vol.-%Upper Explosive Limit:
9,5 Vol.-%Hazardous Effects:
Ss, Sr, C
Details
| 1 | Flammability: Flammable when heated | |
| 3 | Instability: Explosion risk when heated | |
| 3 | Health: Very dangerous | |
| DG-EA: | 2XE | |
Also known as:
- 2,4-Diisocyanato-1-methyl-benzene
- 2,4-Diisocyanatotoluene
- 2,4-TDI
- 2,4-Toluene diisocyanate
- 4-Methyl-m-phenylene diisocyanate
- Desmodur T
- H3C-C6H3(NCO)2
- Scuranate® T100 Scuranate® TX
- TDI
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Toluene 2,4-diisocyanate C9H6N2O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
- Powered-Air Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Protective Suits
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
