i-butyl acetateC6H12O2
CAS-No.: | 110-19-0 |
|---|---|
UN-No.: | 1213 |
EC-No.: | 203-745-1 |
Hazard identification number: | 33 |
Warning sign: |
|
Hazard signs
- H: 225
Highly flammable liquid and vapour
- H: 336
May cause drowsiness or dizziness
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking.
- P: 370 + 378
In case of fire: Use ... for extinction
- P: 403 + 235
Store in a well-ventilated place. Keep cool
- EUH: 066
Repeated exposure may cause skin dryness or cracking
No GHS Classification available at the moment.
Melting point:
-99 °C Boiling Point:
118 °C Density (at 20 °C, if not notified otherwise):
0,87 g/cm3Ionization:
9,97 eVFlash Point:
18 °C Ignition Temperature:
420 °C Vapour Pressure (at 20 °C, if not notified otherwise):
19,9 hPaLower Explosive Limit:
1,25 Vol.-%Upper Explosive Limit:
10,5 Vol.-%
Details
| 3 | Flammability: Flammable with normal temperature | |
| 0 | Instability: No danger for normal conditions | |
| 1 | Health: Low risk. Filter recommended | |
| DG-EA: | 3YE | |
Also known as:
- 2-Methyl-1-propylacetat
- 2-Methylpropyl acetate
- 2-Methylpropyl ester of acetic acid
- beta-Methylpropyl ethanoate
- Isobutyl acetate
- Isobutyl ester of acetic acid
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for i-butyl acetate C6H12O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Portable Gas Detectors and Sensors
Dräger X-am® 8000
- Multi-gas detector
- 1- to 7 gas detection device
- for clearance measurement
- detection of toxic and combustible gases as well as vapours and oxygen
PID sensors
- PID sensor
- detection of volatile organic compounds in low concentrations
- compatible with: X-am 7000 and X-am 8000 – selective benzene measurement with pre-tubes possible
- measuring range: in ppm ...
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
- Powered-Air Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Protective Suits
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 6900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper for donning without assistance
- suit material Umex, reusable
Dräger CPS 6800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for donning without assistance
- suit material Umex, reusable
Dräger WorkMaster Industry
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- zipper on the back
- suit material Symex, reusable
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
