Vertaa

Dräger Flame 1750 IR3 H2

Liekki-ilmaisimet
  • Specially developed for hydrogen fire detection
  • Triple IR sensor, robust and weatherproof
  • High performance and low false alarm rate
  • Offers a maximum coverage of 90 degrees horizontally and vertically
Dräger Flame 1750 H2
Dräger Flame 1750 H2
Dräger Flame 1750 H2 with wheater shield
Dräger Flame 1750 H2
Lisää vaihtoehtoja
Vertaa

Detecting the invisible: Choose the right detector for hydrogen flames

Pikalinkit
Tekniset tiedot
Lisätarvikkeet
Ladattavat tiedostot
Ota yhteyttä
Säteily
Mittausperiaate
Vaaka 90°, pysty 90°
Näkökenttä
Tyypillisesti 4 sekuntia
Vasteaika
−60°C - 85°C
Käyttölämpötila
Katso täydet tekniset tiedot

Kohokohdat

With its triple IR sensor, the Dräger Flame 1750 H2 detects hydrogen-based fires. It offers you high reliability against false alarms and its good measurement performance remains even at extreme temperatures.

Fast and safe detection

The Dräger Flame 1750 H2 is a triple IR flame detector. It detects hydrogen-based fires even at a greater distance. In just five seconds, it notifies you of a hydrogen fire (1-metre flame) at a distance of up to 40 metres. Due to its certified reliab Lisätietoja

Dräger Flame 1750 IR3 H2 Liekki-ilmaisimet -

Developed for hydrogen

The Dräger Flame 1750 H2 was specially developed for the detection of hydrogen fires. Its three IR sensors measure only in the 2 to 4 μm range relevant to hydrogen flames, guaranteeing high performance and a low false alarm rate. Common sources of fa Lisätietoja

Dräger Flame 1750 IR3 H2 Liekki-ilmaisimet -

Robust and durable

The housing is very robust and weatherproof. To protect against icing and fogging, the window can be heated automatically. This allows you to operate the Flame 1750 H2 reliably even under extreme environmental conditions, e.g. in temperatures from -6 Lisätietoja

Simple verification

The built-in self-test "Advanced Optical Verification" (AOV) automatically checks the electronics and optics of the Flame 1750 H2. The three-colour LED on the front allows you to quickly see the device status. Green stands for normal operation, yello Lisätietoja

Key features

  • Fast reaction time: Less than five seconds for tested with a one-meter hydrogen fire from 40 meters distance.
  • Avoidance of false alarms: Using three infrared sensors and sophisticated algorithms.
  • All-weather availability: Equipped with a heated window  Lisätietoja

Tekniset tiedot

Säteily
Mittausperiaate
Vaaka 90°, pysty 90°
Näkökenttä
Tyypillisesti 4 sekuntia
Vasteaika
−60°C - 85°C
Käyttölämpötila

Tärkeimmät tiedot

Mittausperiaate
Säteily
Näkökenttä
Vaaka 90°, pysty 90°
Vasteaika
Tyypillisesti 4 sekuntia
Kaapelin sisääntulo
Kaksi läpivientiä: M25 tai ¾''NPT
Liekinkestävä
Parannettu turvallisuus
SIL
SIL 2, SC 2 (IEC 61508-1-3)
4–20 mA
HART®
RS-485
Rele

Polttoaineen mittausalue

Metaani
30 m
Etanoli
30 m
n-heptaani
12 m
Dieselpolttoaine / JP5 / kerosiini
40 m
Propaani
30 m
Etyleeniglykoli
15 m
Bensiini
40 m
Metanoli
23 m
IPA (isopropyylialkoholi)
39 m
Vety
40 m
Asetoni
40 m
Heksaani
40 m

Tekniset tiedot

Virtalähde
18–32 V DC (24 V DC nimellisarvo)
Käyttölämpötila
−60°C - 85°C
Kosteus
0-100 % suht. kost., ei-kondensoiva
Mitat (K × L × S)
14,5x10 cm
Paino
4,5 Kg
Kotelon materiaali
Alumiini tai ruostumaton teräs, pulverimaalattu
IP-luokitus
IP66 / NEMA 4X

Hyväksynnät

ATEX
IECEx
UL
CSA
CE-merkintä
GOST (EAC)
Suorituskykyhyväksyntä FM3260
Suorituskykyhyväksyntä (DNV-tyyppihyväksyntä)
Toimitushyväksyntä (DNV-tyyppihyväksyntä)
FM

Tutustu koko tuotejärjestelmään.

Tuote on osa Dräger-järjestelmäratkaisua. Yhdistä se seuraaviin järjestelmäkomponentteihin.

Liitännäistuotteet

Keskusyksiköt - Dräger REGARD® 3000
Dräger REGARD® 3000
  • Modulaarinen valvontajärjestelmä erilaisten kaasujen ja höyryjen valvontaan
  • Monivärinen tilavalo ilmaisee järjestelmän tilan
  • Mahdollistaa tulo-, rele- ja yhdyskäytävämoduulien yhdistämisen
Lisätietoja
Keskusyksiköt - Dräger REGARD® 7000
Dräger REGARD® 7000
  • Laajennettavissa oleva valvonta- ja analyysijärjestelmä
  • Valvoo erilaisia kaasuja ja höyryjä
  • Soveltuu kompleksisiin kaasuvaroitusjärjestelmiin
Lisätietoja

Lisätarvikkeet

Dräger Flame Weather Shield
Dräger Flame Weather Shield
The weather shield for a flame detector is designed to protect the sensitive optics from rain, dust, snow, and direct sunlight. It ensures that the detector maintains a clear view of the monitored area without interference from harsh outdoor conditions.
Järjestelmätuki - Dräger FS-5000
Dräger FS-5000
  • Simuloi tulipalon toimintaa Flame 5000:n testausta varten
  • Suunniteltu äärimmäisiin offshore-ympäristöolosuhteisiin
Lisätietoja

Ladattavat tiedostot

Lataa tuotetiedot, käyttöohjeet ja muut tärkeät tiedostot.
Seuraavat vaiheet

Ota yhteyttä Drägeriin

smiling woman
Ota yhteyttä
​Olemme tavoitettavissa: ma-pe: 08:00 - 16:00
​Juurakkotie 3, 01510 Vantaa