Dräger PointGard 2200


The Dräger PointGard 2200 is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Flammable Gas Detectors

  • ​Sensor: Catalytic  Sensor
  • Installation: Non-explosion proof
  • Interface: 4-20 mA, Relays
  • IP class: IP 54
  • Special: Self-contained gas monitor

Ready to use out of the box

PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.

Fast and stable flammable gas detection

​The gas sensor type DQ is based on the proven catalytic bead principle. Innovative dual active elements result in very good long-term zero stability. The long service life is resulting from a good poison resistance and provides you with low ownership costs. The innovative gas inlet allows the sensor to respond to gas within a matter of seconds.

Flexible communications

​PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.

Rugged and compact housing

​PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.

Advanced display with diagnostics

​The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away

​For Cat Ex sensors, flameproof “Ex d” and increased-safety “Ex e” remote sensor enclosures are available for use in hazardous atmospheres.

Ladattavat tiedostot

PointGard 2200 Product Information, en
PointGard 2200 Product Information, en

The Dräger PointGard 2200 is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Lataa

IFU PointGard 2000 Series 9033866 en, en-us me
IFU PointGard 2000 Series 9033866 en, en-us me

Tämä käyttöohje on tarkoitettu ainoastaan tiedoksi. Lue aina tuotteen mukana tullut käyttöohje ja noudata sitä.

Lataa

Tekniset tiedot

Key Facts

Type
Self-contained gas monitor
Response time
Cable entry
M20
Display
Intrinsic Safety
Flameproof
Increased Safety
SIL
4-20 mA
Bus
HART®
Wireless

Technical Data

Power Supply
8 to 30 V DC/ 100 to 240 V AC
Temperature (operation)
-20°C - 50°C
Humidity
0 to 95 % r.h., non-condensing
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
0,26x0,28x0,12 m
Weight
5,51 lb
Housing Material
Glass fiber reinfrorced polyester (GFRP)
Degree of protection (IP class)
IP66

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval
FM

Vertaa vastaaviin tuotteisiinShare

Ota yhteyttä Drägeriin

Contact Us Image Safety Products

Ota yhteyttä

​Juurakkotie 3, 01510 Vantaa

+358 207 119 600

​Olemme tavoitettavissa: ma-pe: 08:00 - 16:00

Haluatko lähettää meille liitteen? Lähetä se meille sähköpostilla tästä: asiakaspalvelu@draeger.com