Vertaa

Dräger Polytron 8720 IR

Myrkyllisten kaasujen ja hapen mittarit
  • Advanced explosion-proof transmitter for carbon dioxide detection- Utilizes high-performance infrared Dräger PIR 7200 sensor- Compatible with most control systems via HART®, Modbus, and Fieldbus
  • Utilizes high-performance infrared Dräger PIR 7200 sensor
  • Compatible with most control systems via HART®, Modbus, and Fieldbus
Dräger Polytron 8720 infrared transmitter for detection of carbon dioxide
Dräger Polytron 8720 EX e stocking station
Lisää vaihtoehtoja
Vertaa

Focus on safety: Detect carbon dioxide with precision

Pikalinkit
Tekniset tiedot
Lisätarvikkeet
Ladattavat tiedostot
Katso kaikki aiheeseen liittyvät aineet
<= 8 sekuntia
Vasteaika
−40°C - 77°C
Lämpötila (toiminta)
Epoksipinnoitettu kuparivapaa alumiini tai ruostumaton teräs SS316 L
Kotelon materiaali
Katso täydet tekniset tiedot

Kohokohdat

The Dräger Polytron 8720 IR is an advanced explosion proof transmitter for the detection of carbon dioxide in percent volume or ppm. It uses a high performance infrared Dräger PIR 7200 sensor, which can be submerged in water without damage. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers HART®, Modbus and Fieldbus making it compatible with most control systems.

Efficient, stable and robust – the Dräger PIR 7200

With its stainless steel 316L enclosure and drift free optics, the Dräger PIR 7200 is built for the harshest industrial and commercial outdoor environments. The unique 4 beam signal stabilizing system makes the sensor resistant to dust or dirt deposi Lisätietoja

Dräger Polytron 8720 IR Myrkyllisten kaasujen ja hapen mittarit -

Easy device management via digital communication

The Dräger Polytron 8720 is equipped with digital interfaces allowing for quick and easy remote interrogation of the transmitter’s state. Integration with existing asset management systems such as PACTware™ is possible via DTM. In addition to the com Lisätietoja

Same design, same operating principle

The Dräger Polytron 8720 belongs to the Polytron 8000 series. All transmitters in this series have the same design and user interface. This allows for uniform operation with reduced training and maintenance requirements. The large graphic backlit dis Lisätietoja

Three relays for controlling external equipment

Upon request, the Dräger Polytron 8720 can also be supplied with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audible alarms, sign Lisätietoja

Safe, robust housing for every application

Polytron 8720 features a Class I, Div. 1 rated explosion proof enclosure made from aluminium or stainless steel, making it suitable for a wide range of environmental conditions. A protection type “e” version includes a convenient docking station whic Lisätietoja

Make the impossible possible with the remote sensor

The remote sensor connection housing allows you to install the sensor separately from the transmitter. This allows you to simply place the sensor closer to the gas cloud in hard-to-reach locations. The display remains visible at eye level. A special  Lisätietoja

Data logger

The Polytron 8720 has a data logger, which records measuring and event data from the past years.

Tekniset tiedot

<= 8 sekuntia
Vasteaika
−40°C - 77°C
Lämpötila (toiminta)
Epoksipinnoitettu kuparivapaa alumiini tai ruostumaton teräs SS316 L
Kotelon materiaali

Avaintiedot

Tyyppi
Lähetin
Mittausperiaate
Infrapuna
Vasteaika
<= 8 sekuntia
Kaapeliläpivienti
M20 tai 3/4" NPT
Näyttö
Luonnostaan vaaraton
Räjähdyksen kestävä
Laajennettu räjähdyksen suojaus
SIL
SIL 2 (IEC 61508-1-3)
4-20 mA
Väylä
HART®

Tekniset tiedot

Virtalähde
10 -30 VDC, 3-johto
Lämpötila (toiminta)
−40°C - 77°C
Kosteus
0-100 % r.h., ei-kondensoiva
Paine (hPa)
700 - 1300
Mitat (korkeus × leveys × syvyys)
28x15x13 cm
Paino
12,57 lb
Kotelon materiaali
Epoksipinnoitettu kuparivapaa alumiini tai ruostumaton teräs SS316 L
Suojausaste (IP-luokka)
IP65/66/67

Hyväksynnät

ATEX
IECEx
UL
CSA
CE-merkintä
GOST (EAC)
Suorituskyvyn hyväksyntä
Kuljetushyväksyntä (MED)

Dräger VOICE
Vaarallisiin aineisiin perustuva turvallisuustuotehaku

Asianmukaiset tiedot ja erityiset turvallisuusteknologian tuotesuositukset yli 1.500 vaaralliselle aineelle.

Tutustu koko tuotejärjestelmään.

Tuote on osa Dräger-järjestelmäratkaisua. Yhdistä se seuraaviin järjestelmäkomponentteihin.

Liitännäistuotteet

Keskusyksiköt - Dräger REGARD® 3000
Dräger REGARD® 3000
  • Modulaarinen valvontajärjestelmä erilaisten kaasujen ja höyryjen valvontaan
  • Monivärinen tilavalo ilmaisee järjestelmän tilan
  • Mahdollistaa tulo-, rele- ja yhdyskäytävämoduulien yhdistämisen
Lisätietoja
Keskusyksiköt - Dräger REGARD® 3900 Series
Dräger REGARD® 3900 Series
  • Itsenäinen ohjausjärjestelmä, jossa on jopa 16 konfiguroitavissa olevaa mittauskanavaa
  • Modulaarinen kokoonpano laitoskohtaista mukauttamista varten
Lisätietoja
Keskusyksiköt - Dräger REGARD® 7000
Dräger REGARD® 7000
  • Laajennettavissa oleva valvonta- ja analyysijärjestelmä
  • Valvoo erilaisia kaasuja ja höyryjä
  • Soveltuu kompleksisiin kaasuvaroitusjärjestelmiin
Lisätietoja

Lisätarvikkeet

Dräger PolySoft software
Dräger PolySoft software
The optional Dräger PolySoft Windows® software is used for configuration, firmware upgrades, diagnostics, and downloading the Polytron's built in datalogger. All from the comfort of your control room using the digital HART® signal that is modulated on top of the analog 4 – 20 mA signal. Out in the field, an available non-intrusive IR dongle easily connects Polytron to PolySoft.
Duct mount kit
Duct mount kit
The duct mount kit enables gas monitoring inside ventilation ducts while keeping the transmitter outside.
​Flow cell
​Flow cell
Function test/calibration of the transmitter during high wind forces and/ or high test gas concentration, including status display, suitable for process applications.
Process cuvette SGR
Process cuvette SGR
For sampling and in-line applications – reduces the inner volume of the measuring cuvette, thus providing a faster speed of response under flow conditions – made of stainless steel.
Splash guard
Splash guard
The Splash guard protects the sensor against water splashes and dirt.
Seuraavat vaiheet

Ota yhteyttä Drägeriin

smiling woman
Ota yhteyttä
​Olemme tavoitettavissa: ma-pe: 08:00 - 16:00
​Juurakkotie 3, 01510 Vantaa