Dräger PointGard 2100

​The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Detektor otrovnih plinova i kisika

  • ​Senzor: elektrokemijski senzor
  • Instalacija: nije otporno na eksplozije
  • Sučelje: 4 – 20 mA, releji
  • Stupanj zaštite IP: IP 54
  • Posebno: samostalni monitor plina

Ready to use out of the box

PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.

Detect over 100 toxic gases using DrägerSensors

​Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F). The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.

Flexible communications

​PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.

Rugged and compact housing

​PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.

Advanced display with diagnostics

​The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away

​A remote sensor enclosure with a cable up to 30 metres long, designed for use in ordinary locations, is available for electrochemical sensors.

Senzori i tvari

Drägerovi senzori za prijenosne detektore plina mogu se upotrebljavati za mjerenje velikog broja opasnih tvari. Provjerite različite senzore pretražujući po tvarima. Obratite se našim stručnjacima kako biste dobili više informacija.

Pretraživanje prema tvari

Unesite tvar

Konfiguracije proizvoda

Uporaba za 75 tvari

30 podudaranja SensorFGDS

Tehnički podaci

Ključni podaci

Vrsta
Samostalni
Uvodnica za kabele
M20
Zaslon
Intrinzična sigurnost
Nezapaljivo
Povećana sigurnost
SIL
4 – 20 mA
Sabirnica
HART®
Bežično

Tehnički podaci

Napajanje
100 – 240 V AC 50 – 60 Hz ili 10 – 30 V DC
Temperatura (rad)
-20°C - 50°C
Vlažnost
Relativna vlažnost zraka od 0 do 95 %, bez kondenzacije
Tlak (hPa)
700 - 1300
Dimenzije (V x Š x D)
0,26x0,28x0,12 m
Težina
8,6 lb
Materijal kućišta
Poliester ojačan staklenim vlaknima (GFRP)
Stupanj zaštite (klasa IP)
IP66

Odobrenja

ATEX
IECEx
UL
CSA
Oznaka CE
GOST (EAC)
Odobrenje performansi
Odobrenje za transport (MED)

Usporedi s povezanim proizvodimaShare

Obratite se našoj podružnici

Contact Us Image Safety Products

Dräger Safety d.o.o.

​Avenija Većeslava Holjevca 40
10010 Zagreb

+385 1 65 01 777

​Fax: +385 1 65 01 765