DimetyldisulfidC2H6S2
CAS-No.: | 624-92-0 |
|---|---|
UN-No.: | 2381 |
EC-No.: | 210-871-0 |
Hazard identification number: | 336 |
Warning sign: |
|
Hazard signs
- H: 225
Highly flammable liquid and vapour
- H: 301 + 331
Toxic if swallowed or if inhaled
- H: 317
May cause an allergic skin reaction
- H: 319
Causes serious eye irritation
- H: 336
May cause drowsiness or dizziness
- H: 370
Causes damage to organs
- H: 410
Very toxic to aquatic life with long lasting effects
No statement for this group.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-85 °C Boiling Point:
110 °C Density (at 20 °C, if not notified otherwise):
1,06 g/cm3Ionization:
7.4 ± 0.1 eVFlash Point:
10 °C Ignition Temperature:
370 °C Vapour Pressure (at 20 °C, if not notified otherwise):
30 hPaLower Explosive Limit:
1,1 Vol.-%Upper Explosive Limit:
16,1 Vol.-%Hazardous Effects:
Ss
Important to know:
Substance included in the Community Rolling Action Plan (CoRAP).
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Dimetyldisulfid C2H6S2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Portable Gas Detectors and Sensors
Dräger X-am® 8000
- Multi-gas detector
- 1- to 7 gas detection device
- for clearance measurement
- detection of toxic and combustible gases as well as vapours and oxygen
Dräger X-am® 5600
- Multi-gas detector
- 1 to 6 gas detection device
- for personal air monitoring
- detection of explosive, flammable and toxic gases as well as vapours and oxygen
Dräger X-am® 5000
- Multi-gas detector
- 1 to 5 gas detection device
- for personal air monitoring
- detection of flammable and toxic gases and organic vapours as well as oxygen and harmful concentrations
Dräger X-am® 5800
DrägerSensor XXS
- Electrochemical sensor XXS
- monitoring of toxic gases and lack of oxygen
- compatible with: Pac series and X-am family
- measuring range: in vol.-% and ppm
DrägerSensor XS
- Electrochemical sensor XS
- monitoring of toxic gases and oxygen deficiency including hydrides, amines, organic vapours
- compatible with: X-am 3000 and X-am 7000
- measuring range: in vol.-% and ...
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Fixed Gas Detection and Sensors
Dräger Polytron® 8100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Increased Safety or flameproof
- Interface: 4-20 mA, Relays, Bus, HART ®
- IP class: IP65/66/67 and SIL2
- Special: ...
Dräger Polytron® 7000
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: 4-20 mA, Bus, HART ®
- IP class: 66/67 and SIL2
- Special: Display
Dräger Polytron® 5100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Increased Safety or flameproof
- Interface: 4-20 mA, Relays
- IP class: IP 65/66/67
- Special: displays
Dräger Polytron® 6100 EC WL
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: Wireless
- IP class: 66/67 and SIL2
- Special: Wireless
Dräger PointGard 2100
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Non-explosion proof
- Interface: 4-20 mA, Relays
- IP class: IP 66
- Special: Self-contained gas monitor
Dräger X-node
Electrochemical DrägerSensor®
- Electrochemical Gas Detector
- continuous monitoring of poisonous gases and oxygen
- compatible with: Polytron 8100, Polytron 7000, Polytron 6100, Polytron 5100, Polytron 3000, PointGard ...
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
