Dräger PARAT® 4700

The Dräger PARAT® 4700 industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK P3 filter ensure protection from toxic industrial gases, vapours and particles for at least 15 minutes.

Ready for escape in only 3 steps

Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is: open the packaging, remove and don the hood – and leave the danger zone.

Reliable protection

The high-performance combination filter reliably protects against a wide range of toxic industrial gases, vapours and particles. The ABEK P3 filter is approved according to the DIN 58647-7 for filtering escape devices; additionally, the filter is tested in accordance with the EN 14387:2004 for gas and combined filter(s). The filter is tightly sealed with two filter plugs keeping it safe over its long lifetime.

16 years of service life

Replacing the filter after 8 years will extend the service life of the PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees.

Robust and ergonomic

Both ergonomics and wearing comfort were considered when designing the packaging of the PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the PARAT Escape Hoods protects the device from damage.

Different packaging types

You can select between two packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaging shows if the unit has been opened.

How-to-use PARAT Escape Hoods – watch our Videos

​Get a quick overview about the donning of our PARAT Hoods und how to replace filters.
·       How-to-use Video PARAT - Soft Pack
·       How-to-use Video PARAT - Hard Case
·       How-to-use Video PARAT - Single Case


Third-party rescue using the PARAT® 4700 Poster, en
Third-party rescue using the PARAT® 4700 Poster, en


PARAT 4700 EU-Konformitätserklärung / EU-Declaration of Conformity
PARAT 4700 EU-Konformitätserklärung / EU-Declaration of Conformity


Technical Data

Key Facts

Product type
Industrial escape hood
Protection against
Industrial gases, vapours and particles
Filter type
Escape time
min. 15 minutes
16 years (filter exchange required after 8 years)
Packaging options
Soft Pack (dust protection IP5); Hard Case (splash water protection IP54)
1,63 lb


Eye protection
Filter expiry date
Training unit

Carrying options

Wall mounting
✓ (Hard Case only)
Hip strap
Shoulder strap
Belt clip
Grip clip
Carrying case
Slip guard carabiner
Hand strap


EN 403:2004
DIN 58647-7
EN 14387:2004 (only filter)
EN 137:2006 Typ 2
NIOSH 42 CFR Part 84

Compare with related ProductsShare

Kontakta oss

Contact Us Image Safety Products

Dräger Sverige AB - Säkerhet

Gamlestadsvägen 18C
41502 Göteborg

+46 10 344 40 00