4,4'-isopropylidendifenolC15H16O2
CAS-No.: | 80-05-7 |
|---|---|
UN-No.: | 3077 |
EC-No.: | 201-245-8 |
Hazard identification number: | 90 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
AFS 2018: 1 (SE)
- NGV (mg/m3 (inh)) 2
- H: 317
May cause an allergic skin reaction
- H: 318
Causes serious eye damage
- H: 335
May cause respiratory irritation
- H: 360 F
May damage fertility
- H: 411
Toxic to aquatic life with long lasting effects
- P: 202
Do not handle until all safety precautions have been read and understood
- P: 273
Avoid release to the environment
- P: 280
Använd skyddshandskar/skyddskläder/ögonskydd/ansiktsskydd.
- P: 302 + 352
IF ON SKIN: Wash with plenty of water/...
- P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
- P: 308 + 313
IF exposed or concerned: Get medical advice/attention
No statement for this group.
No GHS Classification available at the moment.
Melting point:
155 °C Boiling Point:
220 °C Density (at 20 °C, if not notified otherwise):
1,195 (25°C) g/cm3Flash Point:
227 °C Ignition Temperature:
510 °C Hazardous Effects:
R, Ss,ED
Important to know:
Substance included in the Community Rolling Action Plan (CoRAP). Substance of very high concern (SVHC) and included in the candidate list for authorisation. Some uses of this substance are restricted under Annex XVII of REACH.
Details
| 1 | Flammability: Flammable when heated | |
| 0 | Instability: No danger for normal conditions | |
| 2 | Health: Dangerous | |
| DG-EA: | ||
Also known as:
- 4,4-(1-Methylethyliden) bisphenol
- 4,4-Isopropylidendiphenol
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for 4,4'-isopropylidendifenol C15H16O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
