KvicksilverkloridHgCl2
CAS-No.: | 7487-94-7 |
|---|---|
UN-No.: | 1624 |
EC-No.: | 231-299-8 |
Hazard identification number: | 60 |
Warning sign: |
|
Hazard signs
- H: 300
Fatal if swallowed
- H: 310
Fatal in contact with skin
- H: 314
Causes severe skin burns and eye damage
- H: 341
Suspected of causing genetic defects.
- H: 361 f
Suspected of damaging fertility
- H: 372
Causes damage to organs through prolonged or repeated exposure .
- H: 410
Very toxic to aquatic life with long lasting effects
- P: 201
Obtain special instructions before use
- P: 301 + 310
IF SWALLOWED: Immediately call a POISON CENTER/doctor/...
- P: 301 + 312 + 330
Wear gloves/protective clothing/eye protection/face protection
- P: 303 + 361 + 353
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water [or shower]
- P: 304 + 340
IF INHALED: Remove person to fresh air and keep comfortable for breathing
- P: 310
Immediately call a POISON CENTER/ doctor/...
- P: 330
Rinse mouth
No statement for this group.
No GHS Classification available at the moment.
Melting point:
277 °C Boiling Point:
300 °C Density (at 20 °C, if not notified otherwise):
5,4 g/cm3Ionization:
11.38 ± 0.01 eVHazardous Effects:
M,R,Ss
Details
| 0 | Flammability: No explosion danger | |
| 1 | Instability: Instable when heated | |
| 4 | Health: Extremely dangerous | |
| DG-EA: | 2X | |
Also known as:
- Quecksilber(II) chlorid
- Quecksilberdichlorid
- Sublimat
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Kvicksilverklorid HgCl2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
