kromtrioxidCrO3
CAS-No.: | 1333-82-0 |
|---|---|
UN-No.: | 1463 |
EC-No.: | 215-607-8 |
Hazard identification number: | 568 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
AFS 2018: 1 (SE)
- NGV (mg/m3 (inh)) 0,005
- KGV (mg/m3 (inh)) 0,015
- H: 271
May cause fire or explosion; strong oxidizer
- H: 301
Toxic if swallowed
- H: 310 + 330
Fatal in contact with skin or if inhaled
- H: 314
Causes severe skin burns and eye damage
- H: 317
May cause an allergic skin reaction
- H: 334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H: 335
May cause respiratory irritation
- H: 340
May cause genetic defects
- H: 350
May cause cancer.
- H: 361 f
Suspected of damaging fertility
- H: 372
Causes damage to organs through prolonged or repeated exposure .
- H: 410
Very toxic to aquatic life with long lasting effects
- P: 210
Keep away from heat/sparks/open flames/hot surfaces. No smoking
- P: 221
Take any precaution to avoid mixing with combustibles…
- P: 280
Använd skyddshandskar/skyddskläder/ögonskydd/ansiktsskydd.
- P: 301 + 330 + 331 + 310
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Immediately call a POISON
CENTER or doctor/physician.
- P: 303 +361 + 353
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
197 °C Density (at 20 °C, if not notified otherwise):
2,7 g/cm3Ionization:
11.6 ± 0.5 eVHazardous Effects:
C, M, Ss, Sr,R
Important to know:
Substance of very high concern (SVHC) and included in the candidate list for authorisation. Substance of very high concern requiring authorisation before it is used (Annex XIV of REACH).
Details
| 0 | Flammability: No explosion danger | |
| 1 | Instability: Instable when heated | |
| 4 | Health: Extremely dangerous | |
| DG-EA: | 2W | |
Also known as:
- Chromic acid (CrO3): Chromic anhydride
- Chromic acid and chromates
- Chromic oxide
- Chromium(VI) oxide (1:3)
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for kromtrioxid CrO3
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Protective Suits
Dräger SPC 4400 / SPC 4800 / SPC 4900
- Splash Suit
- Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
- CPM (single use) or CLF (limited use)
- Antistatic version ...
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Dräger SPC 2400 PVC / Flexothane
SPC 4700 with CVA 0700
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
